Can be connected with the AC Connector – M of the microinverter. Used for making AC end cable or AC extension cable.
Can be connected with the AC Connector – F of the microinverter. Used for making AC end cable or AC extension cable.
Used to protect vacant AC Connector – F.
Used to protect vacant AC Connector – M.
Consist of an AC Connector – M or F and a cable, to connect the microinverter branch to the distribution box.
Consist of an AC Connector-M, an AC Connector-F and an AC cable, to connect the microinverters when the distance between the microinverters exceeds the original cable length.
Connect the microinverter and the PV module when the distance between the two exceeds the original cable length.
AC Trunk Cable is used to connect the microinverter to distribution box. The Trunk Connector on the AC Trunk Cable is evenly distributed at intervals, Hoymiles provides AC Trunk Cable with different AC Trunk Connector spacing.
The AC Sub Connector of the microinverter can be inserted into the port of the AC Trunk Connector. Plug and play connectors speed up and simplify installation.
Used to protect vacant AC Trunk Port.
Used to protect the cable port of AC Trunk Connector at the end of the AC branch.
Used to disconnect the connection between the microinverter and the AC Trunk Connector.
Used to unlock the AC Trunk Connector upper cover so that the cable can be removed, replaced, and the AC Trunk End Cap installed.
Connect the microinverter and the PV module when the distance between this two exceeds the original cable length.
3P-AC Trunk Cable is used to connect the microinverter to distribution box. The Trunk Connector on the 3P-AC Trunk Cable is evenly distributed at intervals, Hoymiles provides 3P-AC Trunk Cable with different AC Trunk Connector spacing.
The AC Sub Connector of the microinverter can be inserted into the port of the 3P-AC Trunk Connector. Plug and play connectors speed up and simplify installation.
Used to protect vacant AC Trunk Port.
Used to protect the cable port of 3P-AC Trunk Connector at the end of the 3P-AC branch.
Used to disconnect the connection between the microinverter and the 3P-AC Trunk Connector.
Used to unlock the 3P-AC Trunk Connector upper cover so that the cable can be removed, replaced, and the 3P-AC Trunk End Cap installed.
Connect the microinverter and the PV module when the distance between the two exceeds the original cable length.
For years, solar power only worked when the sun was shining, saving you money during the day, but when night fell (as it does) or the grid failed (as it does), your energy production and your savings stopped. You used all the energy you produced with no way to save it for a rainy day.
Now, with the Trevni T Battery, you can bank the power you make and use it anytime, day or night, rain or shine. And in certain regions and states, you can sell the energy you don't need back to the grid—making your battery a bank in every sense of the word.
.png){kind=logo}
